Zontes ZT350-V1, Руководство по обслуживанию

Страница: 32 / 120

4
、
REAR WHELL COMPONENT
31
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251300-063093 Plywood M6×11×15(color Zinc) 6
2 1244100-006000 ZT250-S rear liceness rubber buffer 1
3 1224200-109000 ZT310-V rear auxiliary mudguard 1
4 1270300-273000 φ8 clip(L=73) 1
5 1174200-035000 ZT310 rear turn signal (including license plate light) 1
6 1174100-002000 ZT250-S rear reflector 1
7 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 4
8 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5 2
9 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 4
10 1250502-010093 GB96.1 φ6(environmental color) 2
11 1274100-018000 ZT250-S Anti-hot plate sleeve, muffler 2
12 1184200-030000 ZT310-R adapter cable of vice fender(L=2000) 1
13 1244200-082000 ZT310 Rear sub fender wire rubber plug 1
Fig.9 Rear wheel, swinging
arm assembly
Rear auxiliary mud plate component 3
PROCEDURE:
●
Back reflector, license plate cushion rubber
Flip to the back, Using 10# sleeve remove the nut
①
that comes with the rear reflector
⑹，
remove the
clamp
⑷
and the back reflector. Remove the plate cushion rubber
⑵
and remove the 2 plywood nuts
⑴
on
the back of the rear mudguard fender
⑶
.
●
Steering lights, fender sub-assemblies
Using 4# inner hexagon socket remove the bolts
⑺
on the left and right sides, and remove the flange bushing
⑻
, cushion rubber
⑼
, anti-scalding bushing
⑾
and gasket
⑽
. Disassemble the turn signal and fender
subassembly. Note that the sub-mud switch cable
⑿
cannot be forcibly pulled.
●
Fender sub-assembly
Remove the 2 plywood nuts
⑴
and retaining rubber plug
⒀
from the fender subassembly
⑶
.
●
Turn signal subassembly
Remove the 2 plywood nuts
⑴
from the turn signal
⑸
. Remove the 3 joints of
②
and remove the sub-mud
switch cable
⑿
.
CAUTION:
●
Do not pull the cable hard when removing the sub-mud switch.
●
When reassembling, check if there is any pressure on the wire to prevent it from tightening.Short circuit
caused by bolts. Pay attention to the lamp connector, do not insert the wrong, turn lef orange; right
turn signal is green + blue; license plate light is green + pink.