Zontes ZT350-V1, Руководство по обслуживанию

Страница: 38 / 120

4
、
REAR WHELL COMPONENT
37
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1274300-069094 ZT350-VX Muffler Front Mounting Stud 1
2
1251300-057093 Non-standard nut M10×1.5(Dacromet) 2
3 1250104-006097 GB16674M6×12 (chromed/HH) 1
7 1274300-074000 ZT350-VX rear shock absorber link bushing (left) 1
9 1250305-009091 GB6187.1 M12×1.25(White Zinc) 3
10 1251100-291000 Non-standard bolt M10×1.5×55(Dacromet) 1
11 1274300-060000 ZT350-VX rear shock linkage front bushing 1
13
1251500-034000 12.3×26×3 gasket 2
14 1114300-004000 ZT350-VX rear shock absorber 1
8 4024300-007000
ZT350-VX rear shock-absorbing lower bracket left
reinforcing plate
1
12 1251112-019000
GB5187 non-standard bolt M12×1.25×85(10.9
garde/dacromet)
1
PROCEDURE:
●
Rear shock absorber reinforcement plate
Make a mark with a marker first, then hold the bracket
⑷
and remove the bolt
⑶
with an 8# sleeve, and
take off the bracket
⑷
.
Use a 14# torx wrench to fix the stud (1), and use a 14# torx wrench to remove the nut (2). Then use a 14#
Torx wrench to remove the stud (1).
Use a 14# sleeve to fix the head of the bolt
⑽
, remove the nut (2) with a 14# sleeve, and then remove the
bolt
⑽
after grasping the rear flat fork connecting rod assembly.
Use a 14# sleeve to fix the head of the bolt
⑸
and then use a 17# sleeve to remove the nut
⑼
. Disassemble
the left reinforcing plate
⑻
, bushing
⑺
, right reinforcing plate
⑹
and rear shock absorber assembly.
●
Rear shock absorber link assembly
Remove the bushing
⑾
, fix the head of the bolt
⑿
with a 14# sleeve, and then remove the nut
⑼
with a 17#
sleeve. Take out the bolts
⑿
and remove the 2 pieces of spacers
⒀
, the rear shock absorber
⒁
and the rear
shock absorber link assembly.
2
4 1274200-221000
ZT310-V engine right cover decorative cover
mounting bracket
1
6 4024300-008000
ZT350-VX rear shock lower bracket right
reinforcement plate
1
5 1251112-020000
GB5187 non-standard bolt M12×1.25×153(10.9
garde/dacromet)
Fig.15 Rear wheel, swinging
arm component
Rear shock absorption 2
CAUTION:
●
When assembling the bracket
⑷
, do not tighten the bolts
⑶
first, you need to put the rear shock
absorber back into the vehicle and use the rear shock absorber link baffle to locate the bracket position
and then tighten it.