Zontes ZT125-M 2022, Руководство по обслуживанию

Страница: 53 / 218

53 / 218
7. Reassembly
a. Refer to the procedure for removing the air filter
housing to reassemble it.
b. Put the bolt M6 × 14 is clamped at the step hole on the
inside of the left engine hood, and then 4 # hexagonal socket
is penetrated from the outside to counter the bolt.
c. Align the bolts to the mounting holes and tighten them.
d. Install the other three M6x14 bolts using the 4# hex
socket.
●The vehicle must be parked on a flat and stable ground or a
lifting platform.
●The operation can only be performed after the engine has
cooled down completely.
●The air filter element is checked every 4000 kilometers or
15 months (whichever comes first), and replaced every 8000
kilometers or 30 months (whichever comes first). The air inlet
sponge filter should be replaced every 4000 kilometers or 15
months (whichever comes first).
●The air filter element and the engine air inlet element
should be cleaned regularly in accordance with the provisions
of the regular maintenance and lubrication table.
●If you often ride in humid or dusty areas, you should check
the air filter element more frequently. Be sure to inspect the
waste oil pipe of the air filter frequently.
●If the filter element is damaged, it must be replaced,
otherwise the dirt will be directed into the engine and cause
damage to the engine.
●Ensure that the filter element is assembled in place.
●If the air filter is clogged with dust, the air in take resistance
will increase and the output power will decrease.
●If the filter element of the engine air intake is blocked by
dust, the air intake resistance will increase, which will reduce
the heat dissipation of the belt and affect the life of the belt.
●If the replacement period is not reached, the surface of the
filter element is clean without damage, and you can use a
dust blow gun to blow air from the clean side of the filter
element to blow away the dust on the surface of the filter
element.
●Do n ot let water enter the air filter when washing the
vehicle.
Bolts and nuts of muffler
1. Check for air leaks at the engine exhaust.
The models
Ⅰ
:
The models Ⅱ :
The models Ⅲ :