Zontes ZT125-M 2022, Руководство по обслуживанию

Страница: 117 / 218

117
/
218
The M350 fuse box is shown below:
4. Troubleshooting
If the button cannot be pressed, it is directly judged as a switch problem. If there is no response when pressed, it is necessary
to judge the problem of the switch, circuit, or electrical device.
4.1 Right hand switch
a.No response when pressing the start button
：
No response
when pressing
the start button
Is the key
nearby
Y
Whether the
battery has
electricity
N
Bring the key
close
N
Charge the
battery through
the PKE
charging port
Y
Whether the
insurance is
blown
Whether the
electric torch
light is on
N
Disassemble the
handle switch and
short-circuit the start
button switch line
Y
The right hand
handle vice
switch failure
Y
Whether the
flameout switch
is on
N
Troubleshoot
the main cable
N
Disassemble the
handle switch and
short-circuit the
switch line of the
flameout switch
button, can it be
started?
Y
N
Faulty right handle
switch
Turn to
“ ”
Y
N
Y
b. When the light switch is turned on, the headlight does not turn on, check whether the light fuse is blown, if it is blown,
check the cable fault; if it is normal, disconnect the handle switch and short the light switch line, if it is lit, it is judged as a switch
failure. Otherwise, check for cable or headlight failures.
c. The "E"/"S" mode cannot be switched by pressing the ECO button. Disconnect the switch and short the ECO button switch
line. If it is lit, it is judged as a switch failure. If it is not lit, check the meter and cable failure.
4.2 Right hand handle vice switch
a. “FUEL” Button failure
Short press
"FUEL" no
response
Whether the
battery has
electricity
Charge the
battery
N
Disassemble the
auxiliary switch and
short the "FUEL"
switch wire
Sub switch
failure
Y Y
N
Refer to the troubleshooting
process of the fuel tank cap not
opening
b. No response at start-up
If the engine cannot be started, please refer to the previous "No response when pressing the start button" for
troubleshooting.