Zodiac iAquaLink, Руководство пользователя

Страница: 56 / 68

13.2.5 ORP Alarm - High Alert
The high alert alarm sets an alarm to deactivate the
controller in the event of an ORP reading that is out of
high range. This could be an indication of a mechanical
malfunction in the feeding system.
On the CHEMLINK ORP setup screen, select the HI
ALERT values. Use the UP and DOWN arrows to adjust
the high alert values. Click SAVE when finished.
ChemLink
Home Menu OneTouch Help Back Status
Thu June, 2011 3:03 PM
ChemLink 1 ORP Status
Feeder LIQUID
Feed TM 15 SEC
Delay OT 45 Min
Set Point 7.0
High Alert 8.0
Adjust
Low Alert 6.0
Page
Down
Page
Up
Save Orp pH
Default 950
Range 350 to 950
13.2.6 ORP Alarm - Low Alert
The low alert alarm sets an alarm to deactivate the
controller in the event of an ORP reading that is out of
low range. This could be an indication of a mechanical
malfunction in the feeding system.
On the CHEMLINK ORP setup screen, select the LOW
ALERT values. Use the UP and DOWN arrows to adjust
the low alert values. Click SAVE when finished.
ChemLink
Home Menu OneTouch Help Back Status
Thu June 23, 2011 3:03 PM
ChemLink 1 ORP Status
Feeder LIQUID
Feed TM 15 SEC
Delay OT 45 Min
Set Point 7.0
High Alert 8.0
Adjust
Low Alert 6.0
Page
Down
Page
Up
Save Orp pH
Default 100
Range 100 to 650
13.2.7 Wait or Stop pH
On the CHEMLINK ORP setup screen, select the WAIT
PH/STOP PH entry. Use the UP and DOWN arrows
to adjust the wait/stop pH entry. Click SAVE when
finished.
ChemLink
Home Menu OneTouch Help Back Status
Thu June, 2011 3:03 PM
ChemLink 1 ORP Status
Wait pH NO
Stop pH YES
Next Clean Dec 22
Adjust
Page
Down
Page
Up
Save Orp
pH
Wait for pH:
YES= ORP will not feed at the same time as pH.
NO= ORP will feed regardless of when pH feeds.
Default= YES
Stop for pH:
YES= ORP will not feed if the pH is out of range.
NO= ORP will feed regardless of pH.
Default= YES
Page 56
iAquaLink™ Web Connect Device for AquaLink
®
& PDA Control Systems
|
Owner's Manual
ENGLISH