![background image](http://html2.mh-extra.com/html/zodiac/iaqualink/iaqualink_owners-manual_3952741024.webp)
The pool and spa heat temperatures can be adjusted
between 34°F (1°C) through 104°F (40°C).
NOTE
If you enter temperatures outside this range, an
invalid entry message will be displayed.
Click the HOME or BACK button in the navigation bar
to return to the HOME screen.
8.5
Spa Heat (Dual Equipment)
This feature is also available on the HOME screen for
pool and spa systems.
The SPA HEAT enables the heater for the spa. The SPA
HEAT uses the setting from SET TEMP menu and also
gives you the option to increase or decrease the spa
heater temperature.
HOME > OTHER DEVICES ON / OFF > SPA HEAT
On the HOME menu screen, click the OTHER
DEVICES ON/OFF button to display the DEVICES
screen.
Click the SPA HEAT button and the SET
TEMPERATURE screen will be displayed, on this
screen you have the option to change the temperature
or you may click the ENTER button to turn ON the spa
heater at the preset temperature.
Thu June 23, 2011 3:03 PM
Devices
Home
Menu OneTouch
Help
Back
Status
Page
FILTER PUMP
VARIABLE
SPEED
SOLAR HEAT
SPRINKLERS
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
SPA MODE
CLEAN MODE
ALL OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SPA
POOL HEAT
SPA HEAT
Home
Menu OneTouch
Help
Back
Status
SPA HEAT
104º
7 8 9
4 5 6
1 2 3
0
Clear Enter
Set To:
80
Thu June 23, 2011 3:03 PM
Set Temperature
The default spa temperature is 102°F (39°C).
The pool and spa heat temperatures can be adjusted
between 34°F (1°C) through 104°F (40°C).
NOTE
If you enter temperatures outside this range, an
invalid entry message will be displayed.
Click the HOME or BACK button in the navigation bar
to return to the HOME screen.
8.6
Solar Heat
NOTE
If a Heat Pump is properly connected to this system,
HEAT PUMP will appear on the screen in place of
SOLAR HEAT.
The SOLAR HEAT selection controls solar heating.
A solar heating system and optional solar sensor are
required for SOLAR HEAT selection to operate.
HOME > OTHER DEVICES ON / OFF > SOLAR HEAT
On the HOME menu screen, click the OTHER
DEVICES ON/OFF button to display the DEVICES
screen.
Click the SOLAR HEAT button to turn solar heat ENA
or OFF.
Thu June 23, 2011 3:03 PM
Devices
Home
Menu OneTouch
Help
Back
Status
Page
Filter
Pump
Variable
Speed
Spa
Pool Heat
Solar Heat
Sprinklers
Aux 1
Aux 2
Aux 3
Pool Light
Aux 5
Aux 6
Aux 7
Extra Aux
Off
Adj
On
Off
Off
On
On
Off
Off
Off
Off
Off
Off
Off
All Off
Click the HOME or BACK button in the navigation bar
to return to the HOME screen.
NOTE
If a solar sensor is not installed, EXTRA AUX
replaces SOLAR HEAT and may be used to control
an auxiliary piece of equipment (see the following
Section 9.7, "Auxiliary Equipment" to turn on or off
EXTRA AUX).
For solar heating to take place, the SOLAR HEAT
(DEVICES ON/OFF) must be enabled, and also the
filter pump must be on.
Solar temperature must be at least 5°F/5°C above the
water temperature and the water must be cooler than the
thermostat setting.
Page 24
iAquaLink™ Web Connect Device for AquaLink
®
& PDA Control Systems
|
Owner's Manual
ENGLISH