![background image](http://html2.mh-extra.com/html/zodiac/iaqualink/iaqualink_owners-manual_3952741039.webp)
9.18 Air Temperature
Use the Air Temperature menu to turn the air
temperature display on or off.
9.18.1 To Set Up Air Temperature
MENU > SYSTEM SETUP > AIR TEMP
On the SYSTEM SETUP screen, click the AIR TEMP to en-
able the air temperature.
Home
Menu OneTouch
Help
Back
Status
System Setup
Dusk
Setup
Heat
Pump
PLockOut
Enabled
Air Temp
Enabled
HP Priority
N/A
DST
Enabled
Temp
Calibrate
Slr Priority
Disabled
All Off
Time
Product
Info
Degrees
Fº
Assign
JVAs
Thu June 23, 2011 3:03 PM
9.19 Temperature Calibrate
This menu allows adjustment of the temperature that is
displayed on the iAquaLink. The temperature can only
be adjusted up four (4) degrees Fahrenheit or down four
(4) degrees Fahrenheit.
9.19.1 To Set Up Temp Calibrate
MENU > SYSTEM SETUP > TEMP CALIBRATE
On the SYSTEM SETUP screen, click the TEMP
CALIBRATE button to display the screen below. Click
the POOL or SPA button and use the arrow keys to set
values.
NOTE
If the temperature is off by more than four (4)
degrees, contact your local service representative.
Home
Menu OneTouch
Help
Back
Status
Temperature Calibrate
Pool
80º
Spa
100º
Adjust Temp +/- 4º
+2
Thu June 23, 2011 3:03 PM
9.20 Degrees C/F
The Degrees C/F menu allows you to change the
iAquaLink temperature display from Fahr en heit to
Celsius or vice versa. When changing from Fahrenheit
to Celsius, you will have to re-enter the temperature
settings.
9.20.1 To Set Up Degrees
MENU > SYSTEM SETUP > DEGREES
On the SYSTEM SETUP screen, click the DEGREES
button to set the desired temperature setting.
Home
Menu OneTouch
Help
Back
Status
System Setup
Dusk
Setup
Heat
Pump
PLockOut
Enabled
Air Temp
Enabled
HP Priority
N/A
DST
Enabled
Temp
Calibrate
Slr Priority
Disabled
All Off
Time
Product
Info
Degrees
Fº
Assign
JVAs
Thu June 23, 2011 3:03 PM
9.21 In-Floor Cleaning
This menu is used to enable or disable the automatic in
floor cleaning feature. When enabled, the AquaLink RS
rotates the in-floor Jandy
®
valve actuators (JVAs) every
20 minutes. In-floor cleaning only works when the filter
pump is on.
NOTE
If activated this circuit will utilize the solar JVA relay
socket and circuit to control the in-floor valve unless
a solar sensor is installed, then the circuit reverts to
AUX 3.
Page 39
iAquaLink™ Web Connect Device for AquaLink
®
& PDA Control Systems
|
Owner's Manual
ENGLISH