SENSOR SHORT
This error message indicates that the sensor is not
installed properly or is malfunctioning. Call your pool
service person to resolve this problem.
NOTE
If the message reads WATER TEMP SHORT, the
heater will not fire. If the message AIR TEMP SHORT
is displayed, freeze protection will not operate
correctly.
SPA WILL TURN OFF AFTER COOL DOWN CYCLE
When the system is in Spa Mode (water is circulating
to the spa) and the Spa button is pressed to switch water
circulation to the pool, the system will not switch to
Pool Mode for five (5) minutes, and will continue to
circulate the water [if the heater has fired and has been
off for less than five (5) minutes]. This delay allows
water to cool the heater down by circulating water
through it, preventing equipment damage.
TIMED AUX ON, WILL TURN OFF AFTER 30 MINUTES
This message indicates that a timed auxiliary (usually
a blower) has been activated and will turn off after 30
minutes. Some labels (e.g., blower, fill line) have a
built-in 30 minute shut off.
TIMEOUT MODE
This message indicates that the Controller has
been locked out from the Power Center and is not
operational. TIME OUT mode is used by the pool
service person to aid them in servicing the pool. The
Controller will not be functional for three (3) hours, or
until the switch at the power center is turned back to
AUTO mode.
SPILLOVER DISABLED WHILE SPA IS ON
This message is displayed when the spa spillover is
pressed while in spa mode (water circulation is to spa).
The spillover requires that water circulation is to pool
in order to operate. The spillover will activate when the
system switches back to pool mode.
Page 63
iAquaLink™ Web Connect Device for AquaLink
®
& PDA Control Systems
|
Owner's Manual
ENGLISH
