8.10 Two Speed Operation (*Not
Available for Export Models*)
NOTE
This equipment may not be part of your system.
Please check with your installer.
- Optional TWO SPEED RELAY required.
8.10.1 Two Speed Manual Operation
NOTE
In order to label AUX2 as LOW SPEED, it is required
to have the DIP switch S1-2 turned in the ON
position.
NOTE
All DIP switches are located on the left side of the
AquaLink RS power center bezel.
•
For Pool and Spa Combination Units
If your control is a Pool and Spa combination with
a 2-speed fi ltration pump, the control will operate as
follows: High Speed (Filter Pump) must be on before
Low Speed. Filter pump button, as well as the Spa
button, turns it to High Speed. Low Speed (AUX 2)
button toggles back and forth from low to high.
•
For Pool or Spa Only Units
To use High/Low Speeds, Filter Pump turns on
High Speed, AUX 2 turns on Low Speed. Whatever
mode last used is the OFF button. To toggle, click
whichever speed is not on.
•
For Dual Equipment Units
AquaLink RS 2/6 operates the same as the Pool/Spa
Only units; i.e., Filter Pump turns on HIGH SPEED
and AUX 2 turns on LOW SPEED. The mode last
used is the OFF button. To toggle, click whichever
speed is not on. 2-speed works only on spa fi lter
pump.
•
Two Speed Programming for All Units
When programming HIGH and LOW Speeds to
operate together, think of HIGH SPEED (Filter
Pump) as total duration of fi ltration time, then set
Low Speed (AUX 2) to operate within that duration.
For example, if you want High Speed on for 2 (two)
hours and Low Speed for 10 hours, program the Filter
Pump (High Speed) from 8 AM to 8 PM and Low
Speed from 10 AM to 8 PM.
NOTE
It is not necessary to program both HIGH and LOW
Speeds, even with a combo control system. If only
LOW SPEED is programmed, HIGH SPEED will turn
on at the LOW SPEED on time to prime the pump.
After three (3) minutes the system will switch to LOW
SPEED for the remainder of its programmed time.
8.10.2 High Speed Filtration Pump
HOME > OTHER DEVICES ON / OFF > FILTER PUMP/ SPA
On the HOME menu, click the OTHER DEVICES ON/
OFF button to display the DEVICES screen.
Click the FILTER PUMP or SPA button to turn the main
filtration pump ON to HIGH SPEED.
Thu June 23, 2011 3:03 PM
Devices
Home
Menu OneTouch
Help
Back
Status
Page
FILTER PUMP
VARIABLE
SPEED
SOLAR HEAT
SPRINKLERS
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
SPA MODE
CLEAN MODE
ALL OFF
ON
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
SPA
POOL HEAT
SPA HEAT
8.10.3 Low Speed Filtration Pump
HOME > OTHER DEVICES ON / OFF > AUX 2
On the HOME menu, click the OTHER DEVICES ON/
OFF button to display the DEVICES screen.
Click the FILTER PUMP button to turn the main
filtration pump ON to LOW SPEED.
Thu June 23, 2011 3:03 PM
Devices
Home
Menu OneTouch
Help
Back
Status
Page
FILTER PUMP
VARIABLE
SPEED
SPA
POOL HEAT
SOLAR HEAT
SPRINKLERS
AUX 1
AUX 2
AUX 3
POOL LIGHT
AUX 5
AUX 6
SPA MODE
CLEAN MODE
ALL OFF
OFF
ADJ
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Click the BACK button to return to the previous
screen.
Page 27
iAquaLink™ Web Connect Device for AquaLink
®
& PDA Control Systems
|
Owner's Manual
ENGLISH
