Ziton ZP2 Series, Руководство по установке

Страница: 80 / 148

Chapter 3: Configuration and commissioning
74 ZP2 Series Installation Manual
4. Configure all required settings.
5. Press F4 (Enter), and then press F1 (Back).
6. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
PSTN configuration
Select PSTN configuration to configure public switched telephone network
settings. Configuration options are shown in the table below.
Table 34: PSTN configuration options
Option
Description Default value
Ccode Configures the PSTN country code [1] 099
Line 1 Enables or disables line 1 [2] Disabled
Line 2 Enables or disables line 2 [2] Disabled
Retries Configures the maximum number of times the
number is dialled
05
Kissoff Configures the kiss-off acknowledgement time 48 x 10 ms
[1] See Appendix B “PSTN country codes” on page 125 for a complete list of country codes.
[2] These correspond to the line 1 and line 2 connectors on the installed DACT board.
To change the configuration:
1. Select Panel setup from the Main menu.
2. Select DACT config, and then select PSTN config.
3. Configure all required settings.
4. Press F4 (Enter), and then press F1 (Back).
5. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
GPRS configuration
Select GPRS configuration to configure general packet radio service (GPRS)
settings. Configuration options are shown in the table below.
Note:
GPRS functionality requires an optional GPRS expansion board to be
installed.
Table 35: GPRS configuration options
Option
Description Default value
PIN Configures the sim card PIN number 0000
APN Configures the network Access Point Name (APN)
User Configures the network user name