Ziton ZP2 Series, Руководство по установке

Страница: 110 / 148

Chapter 3: Configuration and commissioning
104 ZP2 Series Installation Manual
Table 61: Individual device diagnostics tests
Polling mode [1]
Description
STA_AB, STA_A, STA_B Configures status polling mode
AV1_AB, AV1_A, AV1_B Configures analogue value 1 polling mode
AV2_AB, AV2_A, AV2_B Configures analogue value 2 polling mode
GRP_AB, GRP_A, GRP_B Configures group status polling mode
[1] AB, A, and B indicate the loop channel used.
Individual device diagnostics values are shown in the table below.
Table 62: Individual device diagnostics values
Value
Description
Val1 First type value (slot 1)
Val2 Second type value (slot 2)
Val3 Third type value (slot 3)
Val4 Analogue value 1 (slot 5) [1][2]
Val5 Analogue value 2 (slot 6) [1]
[1] The analogue values displayed are the raw binary values received from the device.
[2] In the event of a line reference fault, Val4 displays 0xFF and the line reference value is
shown in Val5.
Password setup
Use the Password setup menu to change your password and to manage user
accounts (operator, maintenance, or installer).
Changing your password
Select Password setup to change your password.
To change your password:
1. Select Password setup from the Main menu, and then select Change
password.
2. Enter your current password.
3. Enter and then confirm your new password.
4. Press F4 (Enter), and then press F1 (Back).
5. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.