Zippkits SLR Missile Thunderboat, Инструкция по сборке

Страница: 23 / 50

S L R M I S S I L E
23
Assembled pipe mount.
Radio box. Note the “T” and “R” match bottom.
Tape radio box tightly while glue cures.
Press the ¼-20 blind nut into the nut
plate. Use epoxy on the blind nut barrel.
The small end will protrude slightly, and
you want it to.
Radio Box
Remove all of the radio box parts: Two
long sides, two short sides, the top and
bottom, as well as the 1/8 ply top with lid.
Sand all the parts smooth with 80.
Lay a piece of plastic wrap or waxed
paper on your bench.
Using Titebond, glue the sides together.
Be sure that the “T” and “R” are inside.
Glue that to the bottom and the top.
The bottom also has an “R” and “T”.
Be sure they match the sides.
Glue the lid frame in place.
This will be one continuous gluing
operation.
Wipe any excess glue from the lip formed
by the lid frame.
Tape the radio box tightly until cured.