Zippkits SLR Missile Thunderboat, Инструкция по сборке

Страница: 30 / 50

S L R M I S S I L E
30
Exhaust outlet. Mount as high as possible.
Pipe adjustment in middle of range.
Pipe, extension and outlet. Use zip ties to secure.
Locate the hole for the exhaust outlet high
on the transom. This will help keep water
out of the pipe when the boat stops.
This can be anywhere on the transom you
want. We like to make an approximate
straight line from the pipe to the transom.
Install the exhaust outlet.
Measure the aluminum extension tube so
that it fits between the end of the pipe and
the outlet and is ¼ inch shorter.
If the distance is 10 inches, make the
aluminum tube 9-3/4 inches long.
Slip the tube into the ½ inch ID silicone at
the pipe end.
Slip a piece of 5/8 ID silicone, about 2
inches long, onto the other end of the
aluminum tubing.
Line up the aluminum tubing to the outlet
and slip the silicone over both.
Be sure to leave a 1/8 inch gap between
all parts. You don’t want any metal to
metal contact.
You must keep the gap to a minimum to
prevent the silicone from burning through.
When you do your final setup, put plastic
zip ties at all connections.