Zippkits SLR Missile Thunderboat, Инструкция по сборке

Страница: 34 / 50

S L R M I S S I L E
34
Throttle linkage. No carb in this picture.
Turn fin bolted to bracket.
Throttle
We used the straight pushrod, vertical bell
crank throttle linkage on the prototype,
and prefer it.
Whatever method you use, take the time
to get it right, as there is very little room
Once you are happy with the way the
rudder and throttle work, remove
everything.
Turn fin
Assemble the turn fin to the bracket so
that it is on the inside of the bracket.
If you mount the fin on the outside of the
bracket, it would cause the water to lift the
right sponson in the turns, as water hits
the bracket.
Use the ¼-20x3/4 socket head screws to
mount the turn fin bracket to the blind nuts
in the right sponson.
You may have to run a ¼-20 tap in the
blind nuts if there is epoxy in the threads
from sealing the interior.
If all is well with the turn fin, remove it.