Zippkits SLR Missile Thunderboat, Инструкция по сборке

Страница: 20 / 50

S L R M I S S I L E
20
Glass cloth on seams.
Don’t forget to glass the transom to bottom.
Ready for epoxy resin.
Glass Seams
Cut the included fiberglass material into
pieces that fit between each bulkhead,
along the center seam.
Also cut a piece to fit across the seam on
the front part of the bottom, where you
added the bottom extensions.
Use whatever glass you have left over to
reinforce the transom to bottom area.
Mix up about 4 ounces of epoxy finishing
resin.
You can add a splash of denatured
alcohol, but not too much. 10-15% is
good.
Brush a coat of resin along the seam,
about 3 inches wide. Lay each piece on
the resin and pat down with the brush.
Work quickly.
Do this for each section, the front cross
seam as well as the transom scraps.
Allow to cure.
First coat of epoxy resin.