Zimmer Biomet Zfx EvolutionNEXT Скачать руководство пользователя страница 40

Страница: 40 / 66

Zfx™ Evolution

NEXT

4.7.2 Fill holes

The “Fill holes” function (Fill Holes Assistant) is an interactive
tool with which the user can complete missing 3D data
(holes) in the data set by calculation. The user has the
option of filling all holes automatically or only selected
holes.

Before filling, the hole borders are cleaned using the preset
default parameters, which results in a hole-free data set in
just a few iterations.

The borders of all surfaces are marked in yellow.

It is recommended that only the scan situation to be
processed be shown when filling holes (Keep mesh).

NOTE

Hole filling

CANNOT

be undone (function inactive).

All other toolbar functions (

→

Chapter 3.4) as well as the mouse and keyboard commands (

→

Chapter 4.2) remain active.

The control window in the Fill Hole Assistant is divided into 5 areas

4.7.2.1 Holes

In this dialog box, the number of holes is listed according to size and number of edges; the user can select individual holes.

Activate or deactivate all holes

Number of holes found taking into account
size and selection status in the “Limits” dialog box

Sort by diameter or number of edges

Activate or deactivate one hole

All holes are marked in yellow initially.

4.7.2.2 Limits

“Limits”: Here, the holes to be filled can be limited according to their size and selection status.

The units for the “Hole size” information can optionally be
Diameter or Number of edges

Hole size

Activate size limitation

Activate limitation to selected areas

Содержание Zfx EvolutionNEXT



































































Результаты поиска

Содержание Zfx EvolutionNEXT

Отзывы:

Похожие инструкции для Zfx EvolutionNEXT

Бренды по названию

Популярные бренды

Zimmer Biomet Zfx EvolutionNEXT, Руководство пользователя

Результаты поиска

Содержание Zfx EvolutionNEXT

Отзывы:

Похожие инструкции для Zfx EvolutionNEXT

Бренды по названию

Популярные бренды