Zfx™ Evolution
NEXT
36
4.5.10.2 Match holder (marker) selection
Marker status
Description
Comment
Coded match holder
Transfers the exact position of the match holder to
Zfx Manager 2.0 in the form of coordinates per scanned
match holder in a separate file.
ADVANTAGE
No separate import is necessary
Uncoded match holder
The position of the match holder is only measured as a body
in the overall scan data packet; separate
Zfx position data are not available.
DISADVANTAGE
Data have to be read from the data set.
It is not absolutely necessary to use a coded match holder, as an uncoded match holder is detected as a scan body and
displayed as such.
4.5.10.3 Scanning match holders (markers)
Markers separate
The match holder is recorded using the “Marker Scan”
button.
It can be seen from the green frame whether the marker
scan was successful. The next scan step is not enabled until
the marker has been successfully detected.
NOTE
All match holders that have been set must be marked with a green frame. If this is not the case,
repeat Marker Scan or capture the markers as described below with an additional “Add-Scan” within
the working step.
Markers interfere with one another
Two markers close together cannot be scanned at the same
time as the sides are obscured by the other marker and can
therefore not be detected unambiguously.
The “Marker” scanning step is divided into two or three
sub-steps for gathering the data. This can be done using the
“Add-Scan” function.
Содержание Zfx EvolutionNEXT
