Zimmer Biomet Zfx EvolutionNEXT, Руководство пользователя

Страница: 29 / 66

29
4.5.6.2 Start additional scan
Please note: The numbering 1 –
3
corresponds to the processing sequence
1
Data view (3D)
The model can be positioned in the viewing window using mouse functions ( → Chapter 4.2 “Mouse buttons and
keyboard commands”). When doing so, it must be ensured that the defective areas (holes in the 3D image) are easily
visible.
The user settings are immediately carried out by the rotary swivel unit and the model is repositioned in the unit,
which can be detected by slight sounds of movement.
The toolbar is not available in this application.
The image in the display window is shown in preview mode, i.e. the areas are only shown thinned out.
NOTE
The desired position for the model can only be set within the maximum possible tilting range of the positioning unit.
This means, for example, that a model cannot be scanned from the supporting surface (from below). If the user
should try to make such a setting, the rotary swivel unit will automatically set itself to its maximum possible tilting
position and indicate this in the 3D display window and the live camera image.
2 Camera live image
The camera live image shows the position of the model in the unit and can be zoomed by clicking in the window and
using the MMB. (
→
Chapter 4.2 “Mouse buttons and keyboard commands”).
NOTE
The positions of the object in the camera window are immediately transferred to the positioning unit and indicate to
the user which setting will be or has been scanned.
Brightness
The brightness can be readjusted for each additional scan within the camera live image as in
→
Chapter 4.5.5 “Brightness setting”.
3 Scan button
Additional scan
Additional scan is started and data gathered
Remove last scan
Data from the last additional scan are discarded
Back
All additional scan data are discarded
Complete additional scan
The whole model including all additional scan data is calculated and the system switches to the next scan step.