![background image](http://html1.mh-extra.com/html/ziatech-corporation/zt-6631/zt-6631_hardware-user-manual_3658881033.webp)
7. Autodesk - ADI 4.2 Display Drivers
32
3. Answer
No[Enter]
to the Select a new videodriver... prompt to start the
TurboDLD
Classic configuration program.
4. Make the desired changes to the driver and then Save and Exit to continue to the
AutoCAD drawing editor.
AutoCAD Release 11
To change a Release 11 configuration,
1. Select option 5, Configure AutoCAD from the AutoCAD main menu.
2. From the configuration menu, select option 3, Configure Video Display.
3. Answer
no
to the Select a new video driver... prompt to start the TurboDLD
Classic
configuration program.
4. Change the desired driver options.
5. Save and Exit to return to the AutoCAD configuration menu.
6. Open or begin a new drawing.
To completely reconfigure TurboDLD
Classic using Panacea's defaults,
1. Delete DLDSETUP.DAT from either the \ACAD\DRV sub-directory (R12) or the
TURBODLD sub-directory (R11).
2. Follow the TurboDLD
Classic Configuration instructions earlier in this chapter.
CONFIGURING AN AUTOCAD 11 ENVIRONMENT
During the TurboDLD
Classic installation process, a FASTACAD.BAT file is created and
placed into the TURBODLD sub-directory. FASTACAD.BAT contains four lines that set
four separate environment variables:
•
DLDCFG - used by TurboDLD
Classic to find all of its configuration files
•
DSPADI, RCPADI, and RDPADI - used by AutoCAD, 3D Studio, and AutoShade 2
with RenderMan, respectively, to find the driver file.
FASTACAD.BAT must be run prior to starting AutoCAD R11 and needs to be run only
once per system boot. For automatic loading of the environment variables, you may add
FASTACAD.BAT to the AUTOEXEC.BAT file or an AutoCAD startup batch file.
To add FASTACAD.BAT to your AUTOEXEC.BAT file, insert the line:
CALL D:\TURBODLD\FASTACAD
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com