7. Autodesk - ADI 4.2 Display Drivers
35
This causes 3D Studio to start in its reconfiguration mode.
5. Start 3D Studio by typing
3DS[Enter]
.
During the 3D Studio reconfiguration start-up, you are prompted with a series of
questions. After the first 3D Studio question appears and is answered, the
TurboDLD
Classic configuration program appears. Select a graphics board and
display and rendering resolutions as you would for AutoCAD use.
Because RCPADI device drivers, by definition, are combined display and rendering
devices, you are brought to the TurboDLD
Classic configuration menu during 3D
Studio reconfiguration twice: once each for display and rendering. It is not necessary
to select display and/or rendering resolutions the second time. Simply press the
[Enter]
key to remove the help screen and then highlight Save and Exit to
continue to the next question.
If FASTACAD.BAT is used instead of PANA3DS.BAT to define the AutoCAD
operating environment, the TurboDLD
Classic configuration menu also appears for
RDPADI and DSPADI devices if they are present.
CONFIGURING 3D STUDIO V3.X
Panacea's TurboDLD
Classic drivers run with 3D Studio release 3.X. Please use 3D
Studio's default RCPADI Vibrant Graphic Driver Configuration. Follow the Vibrant
Graphics Configuration Program Setup Procedures that are found in your 3D Studio 3.X
Installation Manual for ADI 4.2 Drivers.
From your Turbodld Subdirectory, run PANA3DS.BAT to set the 3D Studio environment
settings. Run 3DS VIBCFG.
During Configuration for Vibrant Graphics there are four categories:
•
Main-Display
•
Materials-Display
•
Render-Display
•
Flic Playing
Set RCPADI for these four categories.
When Vibrant Graphic settings are complete, click OK to exit and save settings. The
Setup for TurboDLD
Classic Drivers commences. Follow the menus to Setup Display
and Rendering Screen. Save and Exit to 3D Studio.
Please note that the out-of-the-box Cirrus Logic drivers that are supported in 3D Studio
release 3.X are supplied and maintained by Autodesk.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
