7. Autodesk - ADI 4.2 Display Drivers
28
If you do not want any lines of text at the bottom of the display, use AutoCAD to disable
the command area. See the AutoCAD
Interface, Installation and Performance Guide for
more information. Press
[Return]
to continue with font selection.
Font Size
Selects the AutoCAD display screen font or font file to be used. Choose the Font Size
you would like to use for your AutoCAD menus, pull-downs, and dialog boxes:
8x8/8x14/8x16/12x20/12x24. For resolutions over 800x600 we recommend the 12x20 or
12x24 fonts. The default is the 8x14 font.
Dual Screen Mode
Enables or disables dual screen operation of AutoCAD.
User Interface
User Interface options include the parameters for maneuvering within AutoCAD. Using
these options, the Big Picture (Panacea's bird's-eye view) can be configured to suit your
needs or allow for better differentiation within a complex drawing.
Double Click
The Double Click option allows you to set the delay for TurboDLD
Classic's Big Picture
pop-up. This value represents the largest amount of time that can elapse between the
release of the digitizer button and the subsequent press of the same button in order to
detect a double click and display the Big Picture. Setting this number too low results in
the computer seeing two separate clicks, while setting the time too high may slow down
response time for single button presses. Values between 10 and 30 are recommended.
The Double Click time is measured in hundredths of seconds. PC systems have a
timing resolution of 5/100ths of a second; therefore, the entered time is rounded by the
driver to the most closely approximate nearest multiple of 5. This means that a time
setting of 23 is the same as a setting of 27, both of which get rounded to 25 (or one-
quarter of a second). In simplest terms, when adjusting the timing value, it is best to use
multiples of 5.
BP Button
Sets the mouse/digitizer button to display the Big Picture (BP). With the BP Button
option, TurboDLD
Classic gives you the flexibility to use a double click on an available
digitizer/mouse button as a Big Picture pop-up button. On the BP Button menu line,
enter the number of any available digitizer button other than button 1 - button 1 is
reserved as the pick button. Within AutoCAD, simply double click the chosen button to
invoke the Big Picture.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
