ZeroClamp NP90, Инструкция по сборке и обслуживанию

Страница: 45 / 52

Maintenance and Care
ZeroClamp zero point clamping system
– manual
45
8. Maintenance and Care
Caution!
The zero point clamping system may fill up with liquids (lubricoolant)
in clamped or non-clamped state, if it is not used for a longer period
of time. As a result, the clamping force may not be exerted or the
zero point clamping system does not fully open during its first
subsequent use
.
Make sure that the zero point clamping system cannot fill up with
liquid when it is not used!
Release the zero point clamping system of liquids on a weekly basis!
Caution!
The clamping sheets in the zero point clamping system may
adhere in clamped and non-clamped condition, if the zero point
clamping system is not in use for a longer period of time. As a
result, the clamping force cannot be exerted or the zero point
clamping system does not fully opened when used again for the
first time.
Spray the exposed mechanical parts in the chuck once or twice a
week using fine oil (approved agents see 8.4 Cleaning) while operating
the clamping in order to spread the oil. This way the mechanical parts
are kept passable and smooth
Caution!
When operating the zero point clamping system the skin of your
fingers can get caught between the clamping elements.
Do not reach inside the clamp bolt support!