ZeroClamp NP90, Инструкция по сборке и обслуживанию

Страница: 10 / 52

Safety
ZeroClamp zero point clamping system
– manual
10
Caution!
Zero point clamping systems consisting of more than one chuck
(e.g. clamping plates), may be very heavy.
Be sure that any clamping system that you have assembled
on your own, possess suitable fasteners so that it can be
lifted with handling devices or cranes.
Take extra caution if the weight of the clamping systems equals or
exceeds 20 kg.
Caution!
Perform a complete functional test including all special functions
before operating the zero point clamping system.
Intended use
The zero point clamping system is only intended for workpieces, clamping
pallets, clamping towers and clamping devices.
The intended use also entails the adherence to the assembly, operation,
operation environment and maintenance specificati
The manufacturer cannot be held liable if the system is used for any other
purpose as those specified.
Prior to operating the zero point clamping system in an environment where it is
subjected to abrasive dusts or corrosive or aggressive vapors or liquids, you
need to obtain permission from the manufacturing company ZeroClamp.
During the processing the clamping pot must be covered by the pallet,
workpiece or of the fixture.
Operating life of the zero point clamping system
The zero point clamping system is designed to operate for up to a maximum of
1,000,000 clamping cycles.
Constructional modifications
Arbitrary modifications of the clamping system are prohibited for reasons of
safety! Only use OEM parts or standard parts approved by the manufacturer
when replacing defect parts.