ZeroClamp NP90, Инструкция по сборке и обслуживанию

Страница: 7 / 52

General Information
ZeroClamp zero point clamping system
– manual
7
Declaration of incorporation
The manufacturer:
ZeroClamp GmbH
Albert-Mayer-Straße 13
83052 Bruckmühl
hereby declares that the following products:
Product description:
Zero point clamping system
Models: NP90, NP120, NP138 and
NP190
Year of manufacture:
2013
comply with the following essential requirements of the
EC Machinery Directive EC
2006/42 :
The following standards were applied:
DIN EN ISO 4414
Fluid technology
– General rules and safety requirements for
systems and their components
DIN EN ISO 12100 Safety of machinery - General principles for design - Risk
assessment and risk reduction
ISO 16156 Machine-tools Safety
– Safety requirements for the
design and construction of work holding chucks
ISO 19719 Machine tools
— Work holding chucks — Vocabulary
Commission
ing of the incomplete machine is prohib ited until the incomplete machine
is in serted into a machine an d s uch machine com plies wit h the r egulations set out in
the EC machine directive (2006/42/EC).
The manufacturer is obliged to send the special documentation accompanying
the partia lly completed machinery electronically to the appropriate national institution
The relevant technical documentation is compiled i n accordance with part B of Annex
VII.
Name of authorized documentary representative: Klaus Hofmann
Address of authorized documentary representative: see manufacturer address
Icking,
May 2
nd
,2013 Klaus Hofmann, Managing director
Date Name and identification of signatory