TMD-Display One
Technical Support:
http://zennioenglish.zendesk.com
54
ETS PARAMETERISATION
When an individual button has been enabled, a specific tab (“
Button X1
” or “
Button
X2
”) becomes available under “Buttons” in the tree on the left.
Figure 41
Individual Button.
Note
:
the INFO textboxes are functionless (they simply bring the option to add a
description to each button of the project) and can be hidden if desired. See
section 2.2.6
The main parameter that needs to be configured is:
Function
: sets the desired function for the button: “Disabled”, Binary”, “Hold
& Release”, “Two Objects (short press / long press)” or “Scene”, “Scaling
constant”, “Counter constant”, “Float constant”, “Dimmer”, “Shutter” and
“Enumeration”.
Depending on the function, some more parameters are involved (as described next).
Please note that in the next pages “
[Xn]
” is used as a general notation for the
communication objects, as “X” depends on the button pair (A, B, etc.) and “n” depends
on the particular button within the pair (1 or 2).
Disabled
Figure 42
Individual Button - Disabled.
