TMD-Display One
Technical Support:
http://zennioenglish.zendesk.com
46
Action
: assigns each of the two buttons the order to be sent:
“Left=Decrease; Right=Increase”.
“Left=Increase; Right=Decrease”.
Note
:
this parameter will remain hidden unless having selected “Every button
pair is configured separately” in
Action of the pair buttons
(see
section
2.3.1).
Minimum Value
: sets which value from the available range (-671088.625 to
670760.9375) will be the minimum value permitted by the control.
Maximum Value
: sets which value from the available range (-671088.625 to
670760.9375) will be the maximum value permitted by the control.
Short Increment
: sets the increase or decrease to be applied to the current
value on every short press over the increase or decrease buttons,
respectively (i.e., the smaller the increment, the more presses will be
required). The available range is 0.1 – 670760.93750 (0.5 by default).
Long Increment
: sets the increase or decrease to be applied to the current
value on every long press over the increase or decrease buttons, respectively
(i.e., the smaller the increment, the more presses will be required). The
available range is 0.1 – 670760.93750 (1 by default).
Link the control with a box in the display
: sets the area of the display
where to show the indicator of this control, i.e., the current numeric value.
The selected box must be configured with the same data type (see
section 2.4 for details).
LED lighting
: analogous to the homonymous parameter for the previous
functions (see above). In this case, the only options are “Regular” and
“Dedicated Object”.
