Zennio Touch-MyDesign Display One, Руководство пользователя

Страница: 57 / 101

TMD-Display One
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
57
LED illumination control : analogous to the homonymous parameter for the
“Disabled”, “Binary” and “Hold & Release” functions (see previous pages).
The options in this case are “Regular”, “State dependent” and “Dedicated
object”.
Selecting “State dependent” brings an additional parameter, “ LED
Illumination State Object ”, to make the state of the LED correspond either
to object “
[Btn] [Xn] Two switches - Short press
” (“Short Press Object”) or
to object “ [Btn] [Xn] Two switches - Long press ” (“Long Press Object”).
Scene
Figure 46
Individual Button – Scene.
Action : sets whether the value to be sent to the KNX bus (through “ [General]
Scene: send ”) when the user touches the button will always be a scene run
request (“Run scene”) or –depending on the length of button press– a scene
run or save request (“Run (short press) + Save (3s press) scene”).
Scene number : number of the scene (1 – 64) to be sent to the bus, both in
the case of the run requests and the save requests.
LED illumination control : analogous to the homonymous parameter for all
the above functions (see previous pages). The options in this case are
“Regular”, and “Dedicated object”.