Zennio Touch-MyDesign Display One, Руководство пользователя

Страница: 39 / 101

TMD-Display One
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
39

“Left=0; Right=1”.

“Left=1; Right=0”.
Note : this parameter will remain hidden unless having selected “Every button
pair is configured separately” in
Action of the pair buttons
(see
section 2.3.1) .
Action on long press : sets the value that will be sent through “ [Btn] [X] Two
switches: Long press ” after the user long-presses one of the two buttons.

“Left=0; Right=1”.

“Left=1; Right=0”.
Note : this parameter will remain hidden unless having selected “Every button
pair is configured separately” in Action of the pair buttons (see
section 2.3.1) .
LED lighting : analogous to the homonymous parameter for the Binary
function (see above). In this case, however, selecting “State-dependent” or
“State-dependent (both LEDs)” brings an additional parameter, “
State
Object ”, to make the state of the LEDs correspond either to object “ [Btn] [X]
Two switches: Short press ” (“Short Press Object”) or to object “ [Btn] [X]
Two switches: Long press ” (“Long Press Object”).
Figure 30 Pair Buttons - Two objects (short press / long press) - LED lighting.
Dimmer
Figure 31 Pair Buttons – Dimmer.