33 / 58
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 11/06/2019 Rev. 1.8 “User Manual for 3000SP storage inverter”
1.
Battery parameters
1.Battery
Parameters
1.Battery Type
7.Max. discharge current (A)
2*.Battery capacity
8*. Min. voltage threshold
3.Depth of discharge
9.Min discharge voltage (V)
4.Max charge current
(A)
10*.End-of-discharge V (V)
5.Over-voltage
threshold
11*.End-of-charge V (V)
6.Max charging
threshold (V)
12.Save
Note: settings 2*/8*/10*/11* are only accessible for DEFAULT batteries.
Press the “Menu/Back” button to enter the main menu, then press the “OK” button to enter the menu
“1. Settings”, then press “OK.” Now press the “OK” button to enter the menu “1. Battery Parameters.”
The display will show “Enter PWD!”, press OK to enter the password (use “Up” and “Down” to choose
the number and “OK” to move to the next digit):
-
for standard settings enter “0001”
-
for advanced settings (recommended for installers) enter “0715”
If the display shows “Incorrect, try again!” press the “Menu/Back” button and enter the password
again.
After entering the password, select the type of battery used in the system:
1)
Battery type
Scroll up and down using the “Up” and “Down” keys to select the type of battery used. Press
“OK” to confirm the setting and wait for “OK” to appear on the display. If you are using
Pylontech lithium batteries supplied with the storage inverter, select the option “PYLON.” If you
are using lithium batteries such as Tawaki Maui 4 kWh or Weco ReSU 4K4, select “GENERAL
LITHIUM”. If you are using other types of batteries that use a different cell technology, select the
option “DEFAULT.” For more information and for the list of batteries inside the inverter, refer to
section 6.2.
A menu will now open for setting the following options:
2)
Battery capacity (only for DEFAULT batteries)
Select “2. Battery Capacity” and press “OK” to set the capacity of the battery or the battery
system expressed in Ah. Press the “Up” and “Down” keys to change the value of the capacity.
Press “OK” to move to the next digit and then confirm the setting; wait for “OK” to appear on
the display. When setting this parameter, refer to the relative datasheet of the battery used.
