12 / 58
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 11/06/2019 Rev. 1.8 “User Manual for 3000SP storage inverter”
2 current transformers
2 CT terminals
1 communication cable
1 quality certificate
1 warranty certificate
1 user manual
Figure 3 – Components and accessories inside in the packaging
3.3.
Installation environment
For correct functioning of the system, the inverter and batteries must be installed in an
environment with the following characteristics:
•
Dry, clean and sheltered place.
•
Ambient temperature between -25°C and +60°C.
•
Relative humidity between 0% and 100% (non-condensing).
•
Presence of independent air intakes at the entrance and exit of the room.
•
No flammable or explosive materials in the vicinity.
•
Altitude below 2000 metres.
•
Connection to the electrical grid with over-voltage category CATII and CATIII.
•
For further details on installation, please contact technical assistance.
3.4.
Installation tools
The following tools are required for installation of the inverter and batteries. Therefore, they
must be prepared before installation.
No.
Tool
Function
1
Drill
Recommended drill bit: 6 mm
To drill holes in the wall for fixing the
bracket
