14 / 58
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 11/06/2019 Rev. 1.8 “User Manual for 3000SP storage inverter”
3.5.
Wall installation position
The 3000SP storage inverter must be installed vertically on the wall (to ensure rapid and effective
heat dissipation) or at an inclination not exceeding 15°.
Also make sure that the position where the inverter is installed is not directly exposed to sunlight or
subject to the accumulation of snow so as to prevent damage to the internal components of the
machine.
Figure 5 – Correct installation of the 3000SP inverter
3.6.
Assembly instructions
1)
Correctly position the mounting bracket on the wall using a level to ensure that it is straight;
mark the eight holes using a suitable marker pen. Drill the eight holes at the points marked on
the wall using a 6 mm drill bit.
2)
Insert the plugs horizontally into the holes, paying attention to the force and depth with which
they are inserted.
3)
Fix the mounting bracket to the wall using the screws and flat washers supplied.
