30 / 58
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 11/06/2019 Rev. 1.8 “User Manual for 3000SP storage inverter”
9)
Maximum discharging current [A] (only for DEFAULT batteries)
Use the “Up” and “Down” keys to set the maximum discharging current for the battery pack connected
to the system (check the battery datasheet), press “OK” to move to the next value and confirm. Once
the setting has been completed, the system will automatically move to the next section.
10)
Minimum voltage threshold [V] (only for DEFAULT batteries)
Use the “Up” and “Down” keys to set the minimum protection voltage for the battery pack
connected to the system (check the battery datasheet), press “OK” to move to the next value and
confirm. Once the setting has been completed, the system will automatically move to the next
section.
11)
Depth of Discharge (only for DEFAULT batteries)
Use the “Up” and “Down” keys to set the depth of discharge of the battery pack connected to the system
(check the battery datasheet), press “OK” to move to the next value and confirm. Once the setting has
been completed, the system will automatically move to the next section.
12)
End-of-Discharge voltage [V] (only for DEFAULT batteries)
Use the “Up” and “Down” keys to set the end-of-discharge voltage for the battery pack connected to the
system (check the battery datasheet), press “OK” to move to the next value and confirm. Once the
setting has been completed, the system will automatically move to the next section.
13)
End-of-charge voltage [V] (only for DEFAULT batteries)
Use the “Up” and “Down” keys to set the end-of-charge voltage for the battery pack connected to
the system (check the battery datasheet), press “OK” to move to the next value and confirm. Once
this setting has been completed, “OK” will appear on the display.
The initial setup of the 3000SP inverter is complete. Press “OK” to return to the initial menu. If the
display shows an “Error” at the end of the configuration, it will be necessary to restart the system
and repeat the configuration operations.
