YOKOGAWA AQ6376 Скачать руководство пользователя страница 389

Страница: 389 / 417

App-45

IM AQ6376-01EN

Appendix

App

Index

Algorithm for analysis

NOMINAL WAVELENGTH

Parameter

ALGO

MODE DIFF

THRESH

TEST BAND

Procedure

• BOTTOM

Channel:

Each mode bottom detected by a mode search

(Except for the mode bottoms at levels which are above

the mode at the lowest level by THRESH[dB] or more.)

Reference wavelength:

Wavelength of each mode bottom.

Bottom wavelength/level:

Wavelength/level of each mode bottom.

• NOTCH(B)

Channel:

Wach mode bottom detected by a mode search

(Except for the mode bottoms at levels which are above

the mode at the lowest level by THRESH[dB] or more.)

Reference wavelength:

3dB-center wavelength with each mode bottom as the

reference (ALGO=BOTTOM).

Bottom wavelength/level:

Wavelength and level of each mode peak.

• NOTCH(P)

Channel:

Each mode peak detected by a mode search

(Except for the mode bottoms at levels which are above

the mode at the lowest level by THRESH[dB] or more.)

Reference wavelength:

3dB-center wavelength with each mode bottom as the

reference (ALGO=PEAK).

Bottom wavelength/level:

Wavelength and level of each mode bottom.

• GRID FIT

Channel:

Modes within the range of GRID wavelength ± (TEST

BAND/2) among the mode bottoms detected via a

mode search (except for the mode bottoms at levels

which are higher than the mode at the lowest level by

THRESH[dB] or more).

If the number of relevant modes in one GRID is more

than one, only the mode at the lowest level will be

regarded as the channel.

Reference wavelength:

GRID wavelength nearest to each channel.

Bottom wavelength/level:

Wavelength and level of the mode bottom of each

channel.

• GRID

Channel:

A mode search shall not be performed. All the GRID

wavelengths within the range of analysis shall be the

channels.

Reference wavelength:

GRID wavelength of each channel.

Peak wavelength/level:

Bottom wavelength and bottom level within the range of

GRID wavelength ± (TEST BAND/2) of each channel.

Appendix 6 Details of Optical Filter Analysis Function

Содержание AQ6376


































































































































































































































































































































































































































Результаты поиска

Содержание AQ6376

Отзывы:

Похожие инструкции для AQ6376

Бренды по названию

Популярные бренды

YOKOGAWA AQ6376, Руководство пользователя

Результаты поиска

Содержание AQ6376

Отзывы:

Похожие инструкции для AQ6376

Бренды по названию

Популярные бренды