YOKOGAWA AQ6376 Скачать руководство пользователя страница 218

Страница: 218 / 417

6-65

IM AQ6376-01EN

Analysis

App

Index

Executing and Stopping Data Logging

Press

ADVANCE

and then the

DATA LOGGING

soft key. The soft key menu for

data logging appears.

Press the

START

soft key. A confirmation message for deleting the existing

logging data and the EXECUTE and CANCEL soft keys appear.

Press the

EXECUTE

soft key. The existing logging data is deleted, and a new

data logging session begins.

When the specified number of measurements is reached, data logging

automatically stops.

If you press the

STOP

soft key while data logging is in progress, data logging will

be stopped.

If you do not want to delete the existing logging data, press the

CANCEL

soft key.

The previous soft key menu will return.

Note

• When TRACE LOGGING is ON, the AQ6376 checks the amount of free space in the

temporary trace data storage space before starting to log. If there is insufficient free memory

space, a warning will appear.

WARNING 151: Disk space is not enough for logging

If this happens, reduce the number of waveform data values (SAMPLING POINT) or reduce

the logging time to decrease the waveform data size.

• If there is no existing logging data, the confirmation message for deleting the data will not

appear, and data logging will begin immediately.

• Only the STOP soft key is valid while data logging is in progress.

If you press a soft key other than the STOP soft key, a confirmation message for stopping

the data logging will appear. If you do not want to stop data logging, press the NO soft key.

6.15 Analysis Data Logging

Содержание AQ6376


































































































































































































































































































































































































































Результаты поиска

Содержание AQ6376

Отзывы:

Похожие инструкции для AQ6376

Бренды по названию

Популярные бренды

YOKOGAWA AQ6376, Руководство пользователя

Результаты поиска

Содержание AQ6376

Отзывы:

Похожие инструкции для AQ6376

Бренды по названию

Популярные бренды