manualshive.com logo in svg

YOKOGAWA AQ6376, Руководство пользователя

YOKOGAWA AQ6376 - мощный оптический анализатор спектра с высокой точностью. Получите руководство по эксплуатации "Getting Started Manual" в формате PDF бесплатно на manualshive.com. Идеальное решение для измерения и анализа оптических сигналов. Начните использовать AQ6376 с помощью нашего подробного руководства.

Поделиться
Скачать
background image

App-70

IM AQ6376-01EN

Restricted Uses.

  The SOFTWARE is not designed or intended for use or resale in hazardous environments requiring fail-safe 

performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, or 

other devices or systems in which a malfunction of the SOFTWARE would result in foreseeable risk of injury or death to the 

operator of the device or system, or to others.  

Restricted Functionality.

  You are licensed to use the SOFTWARE to provide only the limited functionality (specific tasks 

or processes) for which the DEVICE has been designed and marketed by YOKOGAWA TEST & MEASUREMENT 
CORPORATION.  This license specifically prohibits any other use of the software programs or functions, or inclusion of 
additional software programs or functions, on the DEVICE. 

Security Updates.

  Content providers are using the digital rights management technology (“Microsoft DRM”) contained in this 

SOFTWARE to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, 
in such content is not misappropriated.  Owners of such Secure Content (“Secure Content Owners”) may, from time to time, 
request MS, Microsoft Corporation or their subsidiaries to provide security related updates to the Microsoft DRM components 
of the SOFTWARE (“Security Updates”) that may affect your ability to copy, display and/or play Secure Content through 
Microsoft software or third party applications that utilize Microsoft DRM.  You therefore agree that, if you elect to download a 
license from the Internet which enables your use of Secure Content, MS, Microsoft Corporation or their subsidiaries may, in 

conjunction with such license, also download onto your DEVICE such Security Updates that a Secure Content Owner has 

requested that MS, Microsoft Corporation or their subsidiaries distribute.  MS, Microsoft Corporation or their subsidiaries 
will not retrieve any personally identifiable information, or any other information, from your DEVICE by downloading such 
Security Updates.

NetMeeting/Remote Assistance/Remote Desktop Features.

  The SOFTWARE may contain NetMeeting, Remote Assistance, 

and Remote Desktop technologies that enable the SOFTWARE or other applications installed on the Device to be used 
remotely between two or more computing devices, even if the SOFTWARE or application is installed on only one Device.  You 
may use NetMeeting, Remote Assistance, and Remote Desktop with all Microsoft products; provided however, use of these 
technologies with certain Microsoft products may require an additional license.  For both Microsoft products and non-Microsoft 
products, you should consult the license agreement accompanying the applicable product or contact the applicable licensor to 
determine whether use of NetMeeting, Remote Assistance, or Remote Desktop is permitted without an additional license.

Consent to Use of Data.

  You agree that MS, Microsoft Corporation and their affiliates may collect and use technical information 

gathered in any manner as part of product support services related to the SOFTWARE.  MS, Microsoft Corporation and their 
affiliates may use this information solely to improve their products or to provide customized services or technologies to you.  MS, 
Microsoft Corporation and their affiliates may disclose this information to others, but not in a form that personally identifies you.

Internet Gaming/Update Features.

  If the SOFTWARE provides, and you choose to utilize, the Internet gaming or update 

features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to 
implement the features.  By using these features, you explicitly authorize MS, Microsoft Corporation and/or their designated 
agent to use this information solely to improve their products or to provide customized services or technologies to you.  MS 
or Microsoft Corporation may disclose this information to others, but not in a form that personally identifies you. 

Internet-Based Services Components.

  The SOFTWARE may contain components that enable and facilitate the use of certain 

Internet-based services.  You acknowledge and agree that MS, Microsoft Corporation or their affiliates may automatically 
check the version of the SOFTWARE and/or its components that you are utilizing and may provide upgrades or supplements 
to the SOFTWARE that may be automatically downloaded to your Device.  

Links to Third Party Sites.

  The SOFTWARE may provide you with the ability to link to third party sites through the use of the 

SOFTWARE.  The third party sites are not under the control of MS, Microsoft Corporation or their affiliates.  Neither MS 
nor Microsoft Corporation nor their affiliates are responsible for (i) the contents of any third party sites, any links contained 
in third party sites, or any changes or updates to third party sites, or (ii) webcasting or any other form of transmission 
received from any third party sites.  If the SOFTWARE provides links to third party sites, those links are provided to you 
only as a convenience, and the inclusion of any link does not imply an endorsement of the third party site by MS, Microsoft 
Corporation or their affiliates.

Additional Software/Services.

  The SOFTWARE may permit YOKOGAWA TEST & MEASUREMENT CORPORATION, MS, 

Microsoft Corporation or their affiliates to provide or make available to you SOFTWARE updates, supplements, add-on 
components, or Internet-based services components of the SOFTWARE after the date you obtain your initial copy of the 
SOFTWARE (“Supplemental Components”).  

 

If YOKOGAWA TEST & MEASUREMENT CORPORATION provides or makes available to you Supplemental Components 
and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply.  

 

If MS, Microsoft Corporation or their affiliates make available Supplemental Components, and no other EULA terms are 
provided, then the terms of this EULA shall apply, except that the MS, Microsoft Corporation or affiliate entity providing the 
Supplemental Component(s) shall be the licensor of the Supplemental Component(s). 

YOKOGAWA TEST & MEASUREMENT CORPORATION, MS, Microsoft Corporation and their affiliates reserve the 

right to discontinue any Internet-based services provided to you or made available to you through the use of the 

SOFTWARE.  
This EULA does not grant you any rights to use the Windows Media Format Software Development Kit (“WMFSDK”) 

components contained in the SOFTWARE to develop a software application that uses Windows Media technology.  

If you wish to use the WMFSDK to develop such an application, visit http://msdn.microsoft.com/workshop/imedia/

windowsmedia/sdk/wmsdk.asp, accept a separate license for the WMFSDK, download the appropriate WMFSDK, 

and install it on your system.  

Appendix 8  END USER LICENSE AGREEMENT

Содержание AQ6376


































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AQ6376

Panasonic PV-V4524S Service Manual preview
PV-V4524S
Бренд: Panasonic Страницы: 72
Panasonic KW9M Eco-Power Meter Installation Instructions preview
KW9M Eco-Power Meter
Бренд: Panasonic Страницы: 2
ACECO FC2002 Quick Start Manual preview
FC2002
Бренд: ACECO Страницы: 2
Hammond B-3 Owner'S Manual preview
B-3
Бренд: Hammond Страницы: 130
Lasertec TruPulse L2 Quick Reference Field Manual preview
TruPulse L2
Бренд: Lasertec Страницы: 21
Teledyne Lecroy Frontline 802.11 Hardware And Software Manual preview
Frontline 802.11
Бренд: Teledyne Lecroy Страницы: 223
Environmental Express 99561-84 Instruction Manual preview
99561-84
Бренд: Environmental Express Страницы: 40
RIDGID micro CA-350 Operator'S Manual preview
micro CA-350
Бренд: RIDGID Страницы: 18
TA Instruments TGA55 Getting Started Manual preview
TGA55
Бренд: TA Instruments Страницы: 68
Hanna Instruments HI9146-04 Instruction Manual preview
HI9146-04
Бренд: Hanna Instruments Страницы: 28
Omega DPG3500 Series User Manual preview
DPG3500 Series
Бренд: Omega Страницы: 4
Chauvin Arnoux C.A 43 User Manual preview
C.A 43
Бренд: Chauvin Arnoux Страницы: 44
Droplet SP2-D Operator'S Manual preview
SP2-D
Бренд: Droplet Страницы: 35
Sencore cm2125 Operation And Application Manual preview
cm2125
Бренд: Sencore Страницы: 75
truflo ULTRAFLO 5000 Operating Manual preview
ULTRAFLO 5000
Бренд: truflo Страницы: 33
Alpes Lasers ECLK User Manual preview
ECLK
Бренд: Alpes Lasers Страницы: 41
Thermo Scientific TruDefender FT User Manual preview
TruDefender FT
Бренд: Thermo Scientific Страницы: 56
Velleman NETBPEM User Manual preview
NETBPEM
Бренд: Velleman Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды