YOKOGAWA AQ6376 Скачать руководство пользователя страница 195

Страница: 195 / 417

6-42

IM AQ6376-01EN

6.12 Go/No-Go Judgment (Template)

Procedure

This function compares preset reference data (template data) with a measured

waveform, and makes a Go/No-Go judgment.

Creating Template Data on the Instrument

Press

ADVANCE

followed by the

TEMPLATE

soft key.

Press the

TEMPLATE EDIT

soft key. The template creation screen is displayed.

Press the

LINE SELECT

soft key.

Press the soft key corresponding to the type of template you wish to create.

UPPER LINE: Upper limit line

LOWER LINE: Lower limit line

TARGET LINE: Target value line

Press the

MODE ABS/REL

soft key to select either ABS (absolute) or REL (relative)

as the type (template data types).

Press the

EXTRAPOL TYPE

soft key to select the extrapolation method.

TYPE A: Extrapolation type A

TYPE B: Extrapolation type B

NONE:

No extrapolation

To edit template data, move the cursor to the location of the data to be edited

using the rotary knob or arrow keys, then press the

VALUE EDIT

soft key. Enter a

value using the numeric key pad, rotary knob, or arrow keys.

To add template data, press the

INSERT

soft key. The data at the cursor location

is added. Edit the value using the procedure in step 7 and set it as new data.

To delete template data, move the cursor to the location of the data to be deleted

using the rotary knob or arrow keys, then press the

DELETE

soft key. To delete all

template data points, press the

ALL DELETE

soft key.

Note

• For information about extrapolation methods, see the explanation.
• The same wavelength/level data prior to insertion are inserted as data in the points that

were inserted using the INSERT soft key.

• When the target line is turned OFF with the TEMPLATE DISPLAY soft key, if you edit the

template data at the target line, the target line TEMPLATE DISPLAY turns ON.

Содержание AQ6376


































































































































































































































































































































































































































Результаты поиска

Содержание AQ6376

Отзывы:

Похожие инструкции для AQ6376

Бренды по названию

Популярные бренды

YOKOGAWA AQ6376, Руководство пользователя

Результаты поиска

Содержание AQ6376

Отзывы:

Похожие инструкции для AQ6376

Бренды по названию

Популярные бренды