YASKAWA Lift Inverter L1000V, Техническое руководство

Страница: 248 / 282

B.4 Control Mode Dependent Parameter Default Values
YASKAWA EUROPE SIEP YASKAWA AC Drive L1000V Technical Manual 248
Pa
ra
met
e
r Li
st
B
B.4 Control Mode Dependent Parameter Default Values
The tables below list parameters that depend on the control mode selection (A1-02 / H6-01). Changing the control mode
initializes these parameters to the values shown below.
u
Control Mode Dependent Parameters
Table B.2 Control Mode Dependent Parameters and Default Values
No. Name Setting Range Resolution
Control Mode
V/f OLV V/f w PG OLV w PG
C3-01
<9> Values shown here are for 200 V class drives. Double the value when using a 400 V class drive.
Slip Compensation Gain 0.0 to 2.5 0.1 0.0 1.0 0.0 1.0
C3-02 Slip Compensation Primary Delay Time 0 to 10000 1 ms 2000 200 0 200
C3-05 Output Voltage Limit Operation Selection 0, 1 – – 0 – 0
C4-02 Torque Compensation Primary Delay Time 0 to 60000 1 ms 200 20 200 20
C5-01 Speed Control Loop Proportional Gain 1 0.00 to 300.00 0.01 – 0.20 0.20 0.20
C5-02 Speed Control Loop Integral Time 1 0.000 to 10.000 0.001 s – 0.200 0.200 0.200
C5-03 Speed Control Loop Proportional Gain 2 0.00 to 300.00 0.01 – 0.02 0.02 0.02
C5-04 ASR Integral Time 2 0.000 to 10.000 0.001 s – 0.05 0.05 0.05
C5-05 ASR Limit 0.0 to 20.0 0.1% – 5.0 5.0 5.0
C5-06 ASR Primary Delay Time Constant 0.000 to 0.500 0.001 s – 0.004 0.004 0.004
C5-07 Speed Control Loop Gain Switching Speed 0.0 to 100.0 0.1% – 0.0 0.0 0.0
C5-13 Speed Control Loop Proportional Gain 3 0.00 to 300.00 0.01 – 0.20 0.20 0.20
C5-14 Speed Control Loop Integral Time 3 0.000 to 10.000 0.001 s – 0.200 0.200 0.200
C5-40 ASR Start Speed 0.00 to 100.00 0.01% – 2.50 2.50 2.50
E1-08 Middle Output Frequency Voltage
<9>
0.0 to 255.0 0.1 V 20.0 12.5 20.0 12.5
E1-09 Minimum Output Frequency 0.0 to 120.0 0.1 Hz 0.5 0.3 0.5 0.3
E1-10 Minimum Output Frequency Voltage
<9>
0.0 to 255.0 0.1 V 12.5 2.5 12.5 2.5
S1-01 Zero Speed Level at Stop 0.0000 to 9.999 0.001% 1.000 2.400 1.000 2.400