YASKAWA Lift Inverter L1000V, Техническое руководство

Страница: 32 / 282

2.2 Mechanical Installation
32 YASKAWA EUROPE SIEP YASKAWA AC Drive L1000V Technical Manual
n
Installation Spacing
Figure 2.2 shows the installation distance required to maintain sufficient space for airflow and wiring.
Figure 2.2
Figure 2.2 Minimum Installation Spacing
Note: IP20/Open-Chassis and IP20/NEMA Type 1 models require the same amount of space above and below the drive for installation.
n
Multiple Drive Installation
When installing multiple drives into the same enclosure panel, mount the drives according to Figure 2.2 . When
mounting drives with a minimum side-by-side clearance of 2 mm as in Figure 2.3 , derating must be considered and
parameter L8-35 must be set accordingly. Refer to L8: Drive Protection on page 144 for more details.
Figure 2.3
Figure 2.3 Minimum Space Between Drives (Side-by-Side Mounting)
Note: When installing drives of different heights in the same enclosure panel, the tops of the drives should line up. Leave space
between the top and bottom of stacked drives for cooling fan replacement if required. Using this method, it is possible to replace
the cooling fans later without removing the drive from the panel.
A – 30 mm C – Airflow direction
B – 100 mm
A – Line up the tops of the drives C – 100 mm
B – 30 mm D – Airflow direction
A
A
B
C
B
2 mm
A
B
B
C
C
D