manualshive.com logo in svg

Yamato Just NAVI J-101W, Руководство по эксплуатации

Поделиться
Скачать
Yamato Just NAVI J-101W Скачать руководство пользователя страница 38

Chapter 6  How to use the Multi-functions 

37 

 

The data has been registered in the program number 5. You can call the 
registered data even if the power is turned off. 
Now, you can proceed with the work using the Ranking combination 
function. 
* For subtractive type ranking, remove the box from the instrument. 
* Pressing 

  on the right screen enters the work mode of the program 

just registered. 

* A combination ratio (percentage of items that can be used for packing) is 

displayed in the Main-display and expressed in percentages. This 
combination ratio is used only as a guide. 

* The lower limit and the upper limit of one pack are automatically 

calculated and alternately displayed on the Sub-display. 

* To shrink the range between the upper and lower limits of one pack, 

change the user parameter #168 to narrow the ranking range. However, 
when the ranking range is narrowed, the above-mentioned combination 
ratio gets worse and more items are determined to be outside of the 
ranks. The ranking range is set to the largest (3

) at default to reduce 

the number of items outside the ranks. 

 
 
 

Alternately displayed 

 

 

 

If the setting fails, the system displays 

INF.09

 and returns to the sample 

weighing screen (

). In such a case, the variations in the unit weight may 

be too small. Select samples of various sizes if possible, and make the 
setting again. 

 
 
 
 

  Ranking combination function - How to weigh items 1 (Pre-combination Ranking)   

 
[Example] For a program in which the quantity of combined items is set to 3 and the number of ranks is set to 

6 

 Operation 

Display 

 

Press 

  to call the program number selection screen. With the numeric 

keypad, enter 

‘5’

 as the program number, and then press 

. Now that 

the registered program is called, you can start work. 
*  You cannot call the settings of an unregistered program number through 

this procedure. 

 

 

 

[For additive type ranking (when the user parameter #08 is 0)] 
Place items one by one. The Main-display shows the rank number for the 
measured weight of the added item. 

 

[For subtractive type ranking (when the user parameter #08 is 1)] 
First, place a box containing multiple items on the instrument. Then, remove 
the items one by one. The Main-display shows the rank number for the 
measured weight of the removed item. 

 

If the weight of an item is lower than the lowest rank, underbars appear in 
the rank field instead of its rank number. 

Calculated lower limit 

Calculated upper limit 

Alternative calling method (Easy program call) 
When the Main-display shows 0, enter 

‘5’

 with the numeric keypad. 

Then press 

  when the indication is blinking. You can also call 

program data in this way.

 

Combination ratio (guide) 

Содержание Just NAVI J-101W

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды