Chapter 6 How to use the Multi-functions
26
6-1.1) Just
weighing
function
Just weighing function - How to enable it
Operation
Display
Set the user parameter #178 to
1
.
* For how to set a user parameter, refer to [Section 4-3].
When the setting is made, restart the instrument to enable the Just weight
function.
Just weighing function - How to weigh items
[Example] To proceed with work when the allowable weight range is set to values between 300 g and 315 g
Operation
Display
The program-calling method, weight indications (Main-display), and lamp
lighting rule are basically the same as those of the Checkweighing function.
When no items are placed on the instrument, the Sub-display shows the
lower limit.
Place items on the instrument.
When the measured weight is lower than 300 g (lower limit), the Sub-
display shows "Underweight."
When the measured weight is higher than 315 g (upper limit), the Sub-
display shows "Overweight."
When the measured weight falls within the Allowable weight range, the blue
lamp comes on, indicating that it is an allowable weight.
Upon underweight
Upon overweight
Upon allowable
weight
(Blue lamp comes on)
6-1.2)
Shortage guidance function
* To use the Shortage guidance function, you need to register the lower limit and set the unit weight.
6-1.2) Shortage guidance function - How to set it 1 (To enable the function)
Operation
Display
Set the user parameter #178 to
2
.
* For how to set a user parameter, refer to [Section 4-3].
When the setting is made, restart the instrument to enable the Just quantity
function.
