Chapter 6 How to use the Multi-functions
32
6-3. Ranking
function
(Note) The ranking function cannot be used for transactions or certifications stipulated by the Measurement Act.
* When "NOT LEGAL" is displayed in the lower left of the panel, you
cannot use the results for transactions or certifications stipulated by the
Measurement Act.
Ranking function
Application Ranking
work
Weighing method
(1) If you set the weight ranges corresponding to each rank in advance, the
system displays the rank of items based on the settings.
Advantage
The operator can quickly tell the weight rank of measured items, thus preventing
work errors.
Setting values
Lower limit of each rank, upper limit of the final rank
Indication on Main-
display
Rank number
Indication on Sub-
display
Measured weight of selected items
Max number of
program entries
20 programs
For the ranking function, you need to set the lower limit of each rank and the upper limit of the final
rank.
You can make the settings of up to 12 ranks.
Out of rank
Rank 1
Rank 2
Rank 3
Rank 4
Rank 5
Rank 6
Out of rank
You can make the settings of the ranking function in units that are smaller than indication scale interval.
However, because the minimum setting value is 4 scale intervals, you need to set Rank 1 to a value
of at least 4 scale intervals.
Ranking function - How to make and register (edit) rank settings in a program
[Example] To select the program number 5, set Rank 1 to the range from 100g to less than 200g and set
Rank 2 to the range from 200g to less than 300g
Operation
Display
Before registering program data, set the parameter #01 to
3
on the
user parameter setting screen. * For how to set a user parameter,
refer to [Section 4-3].
* The illustration indicates subtractive type
ranking.
Program number
Rank number
Measured weight
