manualshive.com logo in svg

Yamato Just NAVI J-101W, Руководство по эксплуатации

Поделиться
Скачать
Yamato Just NAVI J-101W Скачать руководство пользователя страница 11

Chapter 2  Preparations before use 

10 

2-2.    How to charge the battery (for the models with the rechargeable battery ) 

 

 Turn the battery cover knob on the back side of the instrument, and then remove the battery cover. 

 Securely insert the plug of the AC adapter into the jack. Then the charging starts. 

                   

 

The instrument is not waterproof during charging. 
Charge the battery at a temperature of 5°C to 35°C. Otherwise, charging may not be properly performed. 
The battery sign blinks during charging. When charging is complete, the blinking stops. 

 

2-3. 

How to set and replace dry batteries (for the models with dry batteries) 

 Turn the battery cover knob on the back of the instrument, and then remove the battery cover. 

 Set the batteries in the correct directions according to the battery polarity (+, -) signs indicated inside the 

battery box. If you set a battery in the wrong direction, the instrument may break down. 

 Close the battery cover, and securely close the battery cover knob. 

   

 

Even when you need to replace one battery, replace both with new batteries. 
Do not mix different types and brands of batteries (e.g. manganese battery and alkaline battery). 
 

2-4. 

Place of installation 

Be sure to place the instrument on a level surface. 
Otherwise, the measurement results will become inaccurate. 
Placing the instrument on a wobbly surface also results in 
inaccurate measurement. 
 
[Note]  Do not place the instrument on a slanted floor   
(if the slant is too large to be adjusted). 
On the underside of the instrument, there are leveling legs for 
adjusting its levelness. Place the instrument on as flat a 
surface as possible, and turn the leveling legs so that the 
bubble in the spirit level is located at the center of the 
reference circle. On adjustment, ensure that all the leveling 
legs are in firm contact with the floor (the instrument goes 
down when a leveling leg is turned clockwise, and it goes up 
when a leg is turned counterclockwise). 

 

 

＋    －

 

 
 

－    ＋

 

Open 

Open 

Reference circle

Air bubble 

(Level) 

(Front side is 

low) 

(Front side is 

high) 

(Right side is 
high) 

Содержание Just NAVI J-101W

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды