Chapter 6 How to use the Multi-functions
25
[Entering the program number.]
With the numeric keypad, enter
‘2’
as the program number. Then press
and hold down
.
[Entering the lower limit.]
With the numeric keypad, enter
‘3’ ‘0’ ‘0’
as the lower limit, and then press
.
* Pressing
on the right screen returns to the program selection
screen.
[Entering the upper limit.]
With the numeric keypad, enter
‘3’ ‘1’ ‘5’
as the upper limit, and then press
.
* Pressing
on the right screen returns to the screen for entering
the lower limit.
[Entering a preset tare.]
* If there is no need to enter this setting, leave this as zero and press
.
With the numeric keypad, enter
‘2’ ‘0’
as the preset tare, and then press
.
* Pressing
on the right screen returns to the screen for entering
the upper limit.
The data has been registered in the program number 2. You can call the
registered data even if the power is turned off.
Now, you can proceed with the work using the Checkweighing function.
Checkweighing function - How to weigh items
[Example] To proceed with work when the allowable weight range is set to values between 300 g and 315 g
Operation
Display
Press
to call the program number selection screen. With the
numeric keypad, enter
‘2’
as the program number, and then press
.
Now that the registered program is called, you can start work.
* You cannot call the settings of an unregistered program number
through this procedure.
Place items on the instrument.
When the measured weight falls within the range of 300 g to 315 g, the
blue lamp comes on, indicating that it is an allowable weight.
Blue lamp comes on
When the measured weight is lower than 300 g or higher than 315 g, the
blue lamp does not come on.
(To return to the screen on which no program is called)
Remove all items from the instrument. When the Zero-point sign comes on,
press .
* If the Zero-point sign does not come on, you cannot switch the
indications.
Alternative calling method (Easy program call)
When the Main-display shows 0, enter
‘2’
with the numeric keypad.
Then press
when the indication is blinking. You can also call
program data in this way.
