Chapter 4 User parameters
18
4-3. How
to
change a user parameter
Operation
Display
During weight measurement, press
and
at the same time to
enter User Parameter Setup mode.
The first screen shows the user parameter #01 and its setting value.
Use the following keys when you set a user parameter.
: When the focus (blinking) is in the
parameter number selection field,
pressing this key shifts the focus to the
setting value field of the parameter.
When the focus is in the setting value
field, pressing this key enters the setting
value and shifts the focus back to the
parameter number selection field.
[Numeric keypad]: Use this to enter a parameter
number or a setting value.
: adds 1 to the parameter number.
: subtracts 1 from the parameter number.
: restarts the instrument.
switches the focus.
Number field is selected
Value field is selected
[IMPORTANT]
When you have changed a setting value, be sure to press
to register the setting, and then turn
off the power.
Note that, unless you register the setting, any changes you made to the setting will be lost.
For the description of the setting items and setting values of user parameters, refer to Section 4-2.
Parameter
number
Setting
value
