60
11. When a trouble occurred
Safety device and error codes
Error codes
This product has a self diagnostic function. When a trouble during operation or a malfunction to the unit
occurs, a character “Trouble” and an error code flashes on the operation panel and an alarm buzzer
sounds. When a trouble occurs, check the error code and immediately stop operation.
When model BF200 is used
Trouble sign and error codes/Causes
Solutions
Trouble of the temperature
sensor.
・
”TROUBLE” sign flashes.
・
flashes
●
When these error codes are
displayed, immediately turn the
power switch on the rear of the
unit [OFF].
●
Replacement of parts or
inspection of the unit is necessary
when a trouble occurs. Contact
your dealer, one of our sales
offices, or the service department.
Remember to notify the error code
when contacting one of the above
listed facilities.
Malfunction in the electric
circuit.
・
”TROUBLE” sign flashes.
・
flashes.
Water level is low or a
malfunction of the water level
detection sensor.
・
”TROUBLE” sign flashes.
・
flashes.
●
Water level is low and the safety
device has activated. Add water.
●
If the error does not released even
if you add water to the correct
level, contact your dealer, one of
our sales offices, or the service
department.
MEASURED TEMP
HEAT
TROUBLE
MEASURED TEMP
HEAT
TROUBLE
MEASURED TEMP
HEAT
TROUBLE
MEASURED TEMP
HEAT
TROUBLE