29
5.How to use the function menu (MODE key)
How to set and cancel the hold function
You can call for the hold function only during the quick auto stop operation and the program operation.
Display after operation and operating procedures
Description
1
Select a function
（
See P.23
”Menu
contents”.
）
Call for
the “Hold function” select
mode using the MODE.
The sub display indicates the present
setting of the hold function. Indication
of
means the disabled
status and
means the enabled
status.
2
Press the
[ENTER] key.
Press the [ENTER] key.
The mode changes to the
setting/cancelling mode for the hold
function.
Indication in the sub display changes
to
.
3
Press the [
▼
] or
the [
▲
] key.
Select [
] to enable and [
]
to disable.
Press the [▼] or the [▲] key to flash
[
] and [
] alternately.
4
〈
Indication
immediately before
the MODE key is
pressed
〉
Press the
[ENTER] key.
Press the [ENTER] key.
While hold is enabled
The main display indicates the
measured temperature when the hold
function is executed.
Indication in the sub display changes
to flashing
.
While hold is disabled
Indication will return to the status
immediately before the [MODE] key
is pressed.
Indication
when
hold is enabled
Indication
when
hold is disabled
To disable
To enable
When disabled
When enabled
Example:
measured
temperature during
execution
