Yamato BF200, Руководство пользователя

Страница: 47 / 79

44
5.How to use the function menu (MODE key)
How to edit a program

During program editing, you can change the “ramp time”, the “ramp level”, the “soak time”, the
“wait function” that have already been input as well as the “repeat start segment” and the “number
of repetitions” by one segment at a time.
Note: You cannot delete a segment or the repeat command or insert a new segment or
the repeat command.

This section makes editing from the step operation to the fixed rate gradient operation for an
example of the 3
rd
segment of the program 3 based on the input example for ”Programming
procedures” (Figure 4) in the previous item.
Display after operation and operating procedures Description
1
<Calling for the number of the program to edit>
Press the [MODE]
key and then press
the [▼] or the [▲]
key.

Press the [MODE] key to change to the
function select mode and then press the
[▼] or the [▲] key.
The mode changes to the program input
select mode and the main display
indicates flashing .
2
Press the [ENTER]
key.

Press the [ENTER] key.
The mode changes to the program
input/edit mode and the main display
indicates flashing .
3
Example: Editing the program 3
Press the [
▲] key.

Press the [▲] key to flash the number of
program to edit in the main display.
( in this example
）
The sub display indicates the number of
used-up segments in the left most 2
digits and the number of free segments
in the right most 2 digits.
4
Press the [ENTER]
key.

Press the [ENTER] key.
The main display indicates the flashing
segment number included at the
beginning of program 3.
The sub display indicates the number of
program being edited in the left digit and
the number of free segments in the right
digit.
5
＜
Calling for segment 3
＞
Press the [▲] key.

Press the [▲] key to flash the number of
segment to edit in the main display.
( in this example)
6
Press the [ENTER]
key.

Press the [ENTER] key.
This indicates that the ramp time of the
segment 3 is set as a step.
Example: Existing program
3
Example: Number of used-up
segments is
使用済みセグメント数
2
Example: Number of free segments
is 3
Example: Number of used-up segments
使用済みセグメント数
5
Example: Number of free segments is 0
Example: Number of program being
executed
Example: Number of free
segments is 0
Example: Ramp time 3 of
segment 3
Example: Number of program being executed
Example: Number of free segments is 0