12
4. Operating procedures (For BF200)
Operations after turning the power switch ON
Start operating the unit when it is ready.
Display after operation and operating procedures
Description
Turn the power switch at
the rear of the unit ON.
Example
…Measured
temperature: 25
℃
Once power is turned on,
fixed-temperature operation is
started with the temperature set in
the previous session as the target.
→The display indicates the current
measured temperature.
”To change the temperature setting”
Press the [SET] key.
Example
…Set
temperature of 40
℃
in
the previous session
Press the [SET] key.
→The display changes indication to
the flashing temperature set in the
previous session.
Press either one of the
[
▽
] or [
△
] keys.
Example
…Changing
fixed-temperature
mode at 40
℃
to the
same mode at 50
℃
.
Press either one of the [
▽
] or [
△
]
keys until the temperature flashing in
the display reaches the target
temperature.
●
Pressing the [
▽
] key decreases
the value and the [
△
] increases
the value.
Press the [SET] key.
Press the [SET] key when you have
adjusted to the temperature you
want.
→The display changes indication of
flashing set temperature to the
present measured temperature and
fixed-temperature operation starts
towards the set temperature.
●When the set temperature is higher
than the present measured
temperature, the “HEAT” lamp
comes on and heating starts.
ENTER
MEASURED TEMP
HEAT
ENTER
MEASURED TEMP
HEAT
ENTER
MEASURED TEMP
HEAT
ENTER
MEASURED TEMP
HEAT
