21
4. Operating procedures
When you want to switch to a different operation mode
When you want to switch from the program operation to the fixed-temperature operation
（
Note
：
Model BF600 does not support indication of a temperature with a decimal point
）
Display after operation and operating procedures
Description
1
Press the [MENU]
key.
Press the [MENU] key during PROGRAM
operation.
The mode is used for setting a target
temperature for the [FIXED-TEMP]
operation.
The indication in the sub display changes
to the flashing target temperature setting
in the previous fixed-temperature
operation. The example shows that the
set temperaure in the previous session is
56.0
℃
.
2
Example: Setting to 65.0
℃
Press the [
▼
] or
the [
▲
] key.
Press the [▼] or the [▲] key to change
the temperature in the sub display to the
one you want.
＊
If you do not change the setting, move to
the step 3.
3
Press the
[ENTER] key.
Press the [ENTER] key when you have
set the temperature you want.
The program being executed is forced to
finish when the [ENTER] key is pressed
and operation switches to the
fixed-temperature operation.
The set temperature in the sub display
changes its status from flashing to
staying lit and the fixed-temperature
operation starts.
The [PROGAM] lamp goes off and the
[FIXED-TEMP] lamp changes its status
from flashing to staying lit.
MEASURED TEMP
TROUBLE
REMOTE
FIXED- TEMP
PROGRAM
MODE
HEAT
STANDBY
ENTER
MENU
MEASURED TEMP
TROUBLE
REMOTE
FIXED- TEMP
PROGRAM
MODE
HEAT
STANDBY
ENTER
MENU
