33
5.How to use the function menu (MODE key)
How to call for the preset temperature
Display after operation and operating procedures
Description
＜
When calling for at inputting/editing a program
＞
1
＜
Example: Setting to the segment 1
＞
Press the [
▼] and
the [
▲] keys for 1
second or longer
at the same time.
At the time of inputting a ramp level
(the sub display indicates
.
Example: Indication of a ramp level in
the segment 1), press the [
▼] and
the [
▲] keys for 1 second or longer at
the same time.
The mode changes to the mode for
calling-for the preset temperature and
the main display indicates the
flashing registered temperature.
Indication in the sub display changes
to
.
2
Example: Calling for 37.0
℃
Press the [
▼
] or
the [
▲
] key.
Press the [▼] or the [▲] key to flash
the temperature you want to call for in
the main display. The example is
calling for
37.0
℃
.
3
Press the
[ENTER] key.
Press the [ENTER] key.
The ramp level (target temperature
setting) is changed to the
temperature you have called for and
the indication in the main display
changes to the flashing soak time
(hold time of a ramp level) and the
mode changes to the soak time
setting mode.
Indication in the sub display changes
to
(Example: soak time in the
segment 1).
How to cancel calling-for of the preset temperature
You can cancel calling-for of the preset temperature any time before pressing the [ENTER] key. Follow
the procedures below. The status will return to the original in about 1 minute even if you do not press
the [ENTER] key.
Display after operation and operating procedures
Description
1
＜
Example: When you want to cancel at the
time of inputting a program
＞
Press the [
▼] and
the [▲] keys for 1
second or longer
at the same time.
If you have called for the preset
temperature and want to cancel it
immediately, press the [▼] and the
[▲] keys for 1 second or longer
again.
The mode returs to the temperature
setting mode immediately before it
was called for.
Example: Registered
preset temperature
Example: Soak time set to the
segment 1
Example: Indication
immediately before
calling for the previous
set temperature
Example: Temperature
called for
Example: Set temperature in
the previous
session
Example indication
immediately before calling for
Example of indication at
the time of calling-for
Abort
